Accessories » Tools/Maintenance » Tools »

Effetto Mariposa GIUSTAFORZA II 2-16 PRO

General

Product Category
Brand	Effetto Mariposa
Model	GIUSTAFORZA II 2-16 PRO

Specific

Features	Easy to use: set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other) insert the appropriate bit (depending on the bolt you need to tighten) using the tool, a loud ‘CLICK’ and a 3° free-movement tells when the torque has been reached always take the wrench to minimum torque value after use. Ratcheting head: for an higher productivity in professional applications, Giustaforza Pro gets a very small yet highly reliable ratcheting head. 1/4″ square (1/4″ square/hex adapter provided, to be able to use standard bits). Lightweight: the light aluminum body keeps the weight down to a record-breaking sub-200g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque. A state-of-the art tool, built to last: functional, linear in design and precise in any detail: shouldn’t be a surprise to know that Giustaforza II 2-16 Pro has been designed and produced in Italy. The tool is hard-anodized with laser-etched iscriptions, and it’s built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics furtherly increase its reliability. Each sample is checked and numbered as a single masterpiece. Metal box with EVA internals: with internals in high density EVA foam and an aluminum outer shell, thi box protects the torque wrench against shocks, hosting both the wrench and the bits (bits are only supplied with DELUXE torque wrench versions). Calibration service: the +-4% tolerance is guaranteed for 5000 cycles (5000 ‘clicks’), then the wrench should be re-calibrated. Calibration is a service we offer in our laboratories at the cost of 35€ plus shipping expenses (may vary depending on the countries: check terms & conditions with the national distributor). After every calibration, the tolerance of +-4% over nominal value will extend for 5000 cycles. After calibration, the wrench will return to the customer with a calibration certificate.

Features

Easy to use:

set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other)
insert the appropriate bit (depending on the bolt you need to tighten)
using the tool, a loud ‘CLICK’ and a 3° free-movement tells when the torque has been reached
always take the wrench to minimum torque value after use.

Ratcheting head:
for an higher productivity in professional applications, Giustaforza Pro gets a very small yet highly reliable ratcheting head. 1/4″ square (1/4″ square/hex adapter provided, to be able to use standard bits).
Lightweight:
the light aluminum body keeps the weight down to a record-breaking sub-200g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.
A state-of-the art tool, built to last:
functional, linear in design and precise in any detail: shouldn’t be a surprise to know that Giustaforza II 2-16 Pro has been designed and produced in Italy. The tool is hard-anodized with laser-etched iscriptions, and it’s built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics furtherly increase its reliability. Each sample is checked and numbered as a single masterpiece.
Metal box with EVA internals:
with internals in high density EVA foam and an aluminum outer shell, thi box protects the torque wrench against shocks, hosting both the wrench and the bits (bits are only supplied with DELUXE torque wrench versions).
Calibration service:
the +-4% tolerance is guaranteed for 5000 cycles (5000 ‘clicks’), then the wrench should be re-calibrated. Calibration is a service we offer in our laboratories at the cost of 35€ plus shipping expenses (may vary depending on the countries: check terms & conditions with the national distributor). After every calibration, the tolerance of +-4% over nominal value will extend for 5000 cycles. After calibration, the wrench will return to the customer with a calibration certificate.